We supply the original spare part HYGIA II K KYS 65/65/15/2 from Hilge worldwide and look forward to your enquiry.
REPLACEMENT FOR SN: 174065 Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Bloc version with stub shaft, motor with stainless steel shroud Stainless steel shroud with GEA company logo Installation: on base frame with machine pads Compensation height Euro-HYGIA II Bloc h2=220 mm ±10 mm Painting colour: RAL 9005 Performance: Q = 25 m³/h, H = 58 m Fls Medium: water Viscosity: , Density: Temperature: , Concentration: Testing Bay Duty Point (Water 20°): Q = 25 m³/h H = 58 m Fls f = 50 Hz Impeller(s): semi-open impeller 2309 Ø 220 Shaft seal: single mechanical seal hard carbon / stainless steel / EPDM Elastomers: EPDM Connections: Diameter DNE 65 Diameter DNA 65 Connection DNE: DIN 11851 Threaded Male Connection DNA: DIN 11851 Threaded Male Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 µm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 µm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (product contacted part) Shroud: AISI 304 - 1.4301 Calotte holder: AISI 304 - 1.4301 Bearing bracket/Lantern: stainless steel - AISI 316 Motor: three-phase motor with PTC thermistor Size: 160M Vendor: our choice Performance: 15 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity
Brand / Manufacturer | Hilge |
Article number | HYGIA II K KYS 65/65/15/2 |
Description | End suction stainless steel pump |
KCCO Article number | 10095035 |