Spare part HYGIA II CN CNY 100/100/11/2 Hilge

Spare part available

We supply the original spare part HYGIA II CN CNY 100/100/11/2 from Hilge worldwide and look forward to your enquiry.

Free spare parts enquiry

  • Guaranteed response
  • free of charge & without obligation
  • Expert review

Information for spare part HYGIA II CN CNY 100/100/11/2

Cr-Ni-Mo steel Description: GEA Hilge HYGIA II CN CNY 100/100/11/2 alternative acc to 23/03/138238, NOTE: New pump with PN12 connections! Execution: Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in long coupled version, with standard motor Installation: on mild steel baseplate Coupling: DKM Painting colour: RAL 9005 Performance: Q = 60 m³/h, H = 30 m Fls Medium: CIP-Rücklauf Impeller(s): semi-open impeller 19012 Ø 175 Shaft seal: double mechanical seal Tandem product-side: hard carbon / stainless steel / EPDM athmosphere-side: hard carbon / stainless steel / EPDM Sealing fluid connection: for fixed pipework, pipe connection with plain end, Ø10x1mm Elastomers: EPDM Connections: Diameter DNE 100 Diameter DNA 100 Connection DNE: EN1092-1/11 /PN16 (DIN 2633) Connection DNA: EN1092-1/11 /PN16 (DIN 2633) Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 µm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 µm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (product contacted part) Baseplate: mild steel - St 37 Bearing bracket/Lantern: cast iron - GG 20 Motor: three-phase motor with PTC thermistor Size: 160M Vendor: our choice Performance: 11 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B3 - on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity

Brand / Manufacturer Hilge
Article number HYGIA II CN CNY 100/100/11/2
Description End suction stainless steel pump
KCCO Article number 17001529
+49 (0)511 89 88 09 10
Spare parts enquiry