Spare part SLF-OD4"/OD4"-ZM100-7504-S-12N/52 +10-S---M GEA

Information for spare part SLF-OD4"/OD4"-ZM100-7504-S-12N/52 +10-S---M

Product data not specified Basic valve type (S) Control valve type S Body combination (L) 1W-1S Addition to valve type (F) Control cone equal percentage Nominal width standard top/middle OD Nominal size top/middle 4.0 Nominal width standard bottom OD Nominal width bottom 4.0 Rest position (Z) closed Control cone sealing (M) metallic (without V-ring) KVS value 100.0 Note Please note: *** The specified KVS value refers to the configuration Control cone seal W in conjunction with housing combination L. *** Actuator type 750 Control air pressure min. 5.0 bar / 6 bar max. Product pressure max. 6.0 bar Signal pressure (4) 1.65 - 2.65 bar Actuator material (S) Stainless steel Diaphragm actuator Seal material (1) EPDM (FDA) Surface finish Body (2)inside Ra 0.8 µm, outside matt Connection fittings (N) Weld end Identification plate (52) Adhesive label SAMSON Positioner (10) Type TROVIS 3730-1 I/P *** Signal range 4....20 mA DC Degree of protection IP66 / NEMA 4X Cable gland M20 x 1.5 *** End position feedback (S) Software limit switches Air connection (M) Hose Ø 6/4 mm All pressures [bar] refer to gauge pressure [bar] unless otherwise stated, refer to overpressure [bar g]. The control valve is only to be operated in the direction of flow against the control cone.