Spare part GR31M-2DK.5H.2R Ziehl-Abegg

Information for spare part GR31M-2DK.5H.2R

UL recognized component E111399 ZA-155 3~ 500-600V Y 50Hz P1 0,80kW 0,90A 2610-2820rpm COSY 0,81 3~ 500V ±10% D 60Hz P1 1,30kW 1,7A 3300rpm 3~ 600V Y 60Hz P1 1,20kW 1,2A 2920-3100rpm IP10 THCL 155 MK115-2DK.12.U ErP conform no Supply cable axial, 25cm. wiring diagram: 1360-106XA Sandwich label Rating plate: 2x fixed Fitting position H. Motor protection: thermal contact Operating mode: Continuous operation with occasional starts according to DIN EN 60034-1:2011-02. Occasional starting between -40 °C and -25 °C is permissible Continuous operation below -25 °C only with special bearings for refrigeration applications on request. Moisture and hot climate protection. Balancing quality G 2,5 Painting motor: 1 coat paint RAL 7032 (pebble grey). Impeller made of aluminium, reinforced design, unpainted Hollow profils made of unpainted aluminium Support plate motor side 330x330mm Fan dimension suction side 380x380mm. Inlet nozzle without measuring device for volume flow Inlet nozzle made of galvanised sheet metal unpainted Inlet guard grille mounted. Without isolation of structure-borne sound. Mounting position rigidly. ball bearing with long-time lubrication. This product was designed with the above mentioned features. Suitability of the product for specific applications is beyond the control of ZIEHL-ABEGG. ZIEHL-ABEGG can therefore neither guarantee nor prove the suitability of this product for the specific application or customer’s intended purpose. The customer is responsible for testing and releasing the product for his intended application. In addition, please note that the respective assembly / operating instructions and declaration of incorporation / declaration of conformity must be observed. Please find these documents under https://bal.ziehl-abegg.com