Ersatzteil BS06-34V/D07LA4-D/C3-SP Bauer Gear Motor

Informationen zum Ersatzteil BS06-34V/D07LA4-D/C3-SP

like motor no. 26255397-1 Art.no. 188Z0747 (replaced 171Z4201) weight 15 kg/pcs ***technical details: worm geared motor BS06-34V/D07LA4-D/C3-SP Motor power: 0,37-S2-1 min kW Output shaft speed: 33,0 rpm Torque: 77 Nm Service factor fB: 1,1 Mounting: H4 Terminal box position: II / A Corrosion protection: Coro 3 Painting: RAL 9006 Dimensional drawing: BS06;N-SD Catalogue: DG 07 Net weight per unit: approximately 15 kg Add.-/Special design: Suitable for ambient temperatures from -20 to 120°C. Output plate material V2A-Steel Suitable for ambient temperature +120°C Gear design: Type: BS06 2 -staged worm gear Design code 34V with standard flange on side front (d: 140 mm) hollow shaft with keyway (d: 25 mm) Total gear reduction i: 41,29 Add.-/Special design: With special output shaft. K20 (BS06/SG2), d : 20 mm Seal FKM (Viton) Lubricant type: PGLP 220 with Heinrichs Breather Sondergetriebegehäuse nach ZN.BS06/1-01-A1-AL P.2A. Mit Verschlußschrauben Material-Nr: ID 30419711 Design of the motor: Type: Three-phase squirrel cage motor D07LA4-D Rated speed: 1350 rpm Voltage: 400/690 V Connection: D/Y Frequency: 50 Hz Rated current: 1,35/0,78 A Power factor cos phi: 0,66 Temperature class: F IP prot. type per EN 60529: IP 66 IC cool. type EN 60034-6: IC 411 terminal box: TB122 Design acc. to DIN VDE 0530-1/EN 60034-1 Add.-/Special design: With protective hood. Fan made of special plastic B3 G5 ULTRAMID . Seal FKM (Viton) With Motor bearing grease Klüber Petamo GHY 133 ***Please note: Gearbox To provide for radial alignment tolerances, with the gearbox design "quill shaft and flange" the flange must be made to fit freely, so that centering over the bearings is possible. This allows indeterminate bearing forces to be largely avoided. Angular errors cannot be compensated for by this method, however. Gearboxes with torque reaction by means of flange or torque arm must have the torque reaction on the same side as the radial force over the output shaft. Please contact the factory in case of other designs. Motor The motor is designed for operation in S2-1 min mode. Please note the instructions pertaining to motor protection in the main list ! IP66: Connection chamber separated from motor interior by sealing compound; protected against short-term flooding, with enhanced corrosion protection.