Ersatzteil BS03-38H/DPE08MA4/SP Bauer Gear Motor

Informationen zum Ersatzteil BS03-38H/DPE08MA4/SP

According to the new regulation (EU) 2019/1781 & (EU) 2021/341, the new motor has to be must at least comply with efficiency class IE2. Due to this change, we had to completely redesign the gearmotor. We ask you to check for usability. Motor power: 0,25 kW Output shaft speed: 29,0 rpm Torque: 47,5 Nm Service factor fB: 1,15 Mounting: H2 Terminal box position: II / A Corrosion protection: Standard Painting: RAL 7031 Dimensional drawing: BS03 Catalogue: B 2010 Net weight per unit: approximately 10 kg Add.-/Special design: special design Wellendichtung an der Arbeitswelle mit dichtlippe nach außen (verkehrt herum) eingebaut Gear design: Type: BS03 1 -staged worm gear Design code 38H with standard flange on side rear (d: 120 mm) solid output shaft on gear side rear for flangeversion (d: 20 mm) Total gear reduction i: 50,00 Add.-/Special design: Seal FKM (Viton) Lubricant type: PGLP 220 Design of the motor: Type: Three-phase squirrel cage motor DPE08MA4 Rated speed: 1440 rpm Voltage: 400 V Connection: Y Frequency: 50 Hz Rated current: 0,71 A Power factor cos phi: 0,66 efficiency class: IE3 - 77,7 % (acc. EN 60034-2-1) Temperature class: F IP prot. type per EN 60529: IP 65 IC cool. type EN 60034-6: IC 411 terminal box: KAG2 Design acc. to DIN VDE 0530-1/EN 60034-1 Add.-/Special design: Seal FKM (Viton) Please note: Gearbox Gearboxes with torque reaction by means of flange or torque arm must have the torque reaction on the same side as the radial force over the output shaft. Please contact the factory in case of other designs. Motor Motor connection by means of CAGE-CLAMP. CAGE CLAMP is a Registered Trademark of the company WAGO