Ersatzteil BK30-74VH/D09XA82-TF-D/C3 Bauer Gear Motor

Informationen zum Ersatzteil BK30-74VH/D09XA82-TF-D/C3

Motor ratings (kW) 0.45/1.8 In version like motor no. 25713656-2 Item no. 173N0212 details: Motor power: 0,45/1,8-S3-25/75% kW Output shaft speed: 12,0/47,5 rpm Torque: 300/325 Nm Service factor fB: 1,5/1,4 Mounting: H4 Terminal box position: II / A Corrosion protection: Coro 3 Painting: RAL 7031 Dimensional drawing: BK30-BK30Z;N-SD Catalogue: DG 07 Net weight per unit: approximately 56 kg Gear design: Type: BK30 2 -staged bevel gear Design code 74VH C-Flange with tapped holes on side front + rear hollow shaft with keyway (d: 35 mm) Total gear reduction i: 59,27 Add.-/Special design: Lubricant type: PGLP 460 with Heinrichs Breather Design of the motor: Type: Three-phase squirrel cage motor with pole-changing D09XA82-TF-D Rated speed: 700/2800 rpm Voltage: 690 V Connection: Y/Y Frequency: 50 Hz Rated current: 1,39/2,5 A Power factor cos phi: 0,65/0,89 Temperature class: F IP prot. type per EN 60529: IP 66 IC cool. type EN 60034-6: IC 411 terminal box: TB222 Design acc. to DIN VDE 0530-1/EN 60034-1 Add.-/Special design: pole-changing with two separate stator windings With built in thermistors for release in both windings per supplemental connection diagram ZK010.1140-05. With protective hood. Connection chamber separated from motor interior by sealing compound Please note: Gearbox Gearboxes with torque reaction by means of flange or torque arm must have the torque reaction on the same side as the radial force over the output shaft. Please contact the factory in case of other designs. Motor The motor is designed for operation in S3-25/75% mode. Please note the instructions pertaining to motor protection in the catalog ! To achieve the smoothest possible change of speed from the high speed to the low speed, especially where there are significant external flywheel moments, we recommend, depending on the application, two phase reconnection or use of a suitable soft pole reconnection device. Motor connection by means of CAGE-CLAMP. CAGE CLAMP is a Registered Trademark of the company WAGO At higher input speeds, increased operating noise and temperature rise of the gear motor can be expected. Furthermore, the lifetime of the shaft seals will reduce, which needs to be observed, when setting service intervals. Motor not within the scope of Regulation (EU) 2019/1781 according to Article2, paragraph 2(n).