Pieza de recambio HYGIA II K KYS 65/65/11/2 Hilge

Pieza de recambio disponible

Suministramos la pieza de recambio original HYGIA II K KYS 65/65/11/2 de Hilge en todo el mundo y esperamos su consulta.

Consulta gratuita de piezas de recambio

  • Respuesta garantizada
  • gratis y sin compromiso
  • Examen de expertos

Información sobre la pieza de recambio HYGIA II K KYS 65/65/11/2

Cr-Ni-Mo steel Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Bloc version with stub shaft, motor with stainless steel shroud Stainless steel shroud with GEA company logo Installation: on base frame with machine pads Compensation height Euro-HYGIA II Bloc h2=220 mm ±10 mm Painting colour: RAL 9005 Performance: Q = 30 m³/h, H = 55 m Fls Medium: Wasser, 20°C Viscosity: , Density: Temperature: , Concentration: Testing Bay Duty Point (Water 20°): Q = 30 m³/h H = 55 m Fls f = 50 Hz Impeller(s): semi-open impeller 2207 Ø 220 Shaft seal: single mechanical seal hard carbon / stainless steel / EPDM Elastomers: EPDM Connections: Diameter DNE 65 - nominal Ø acc. to ASME BPE (DIN 11866 Range C): 2 1/2 " Diameter DNA 65 - nominal Ø acc. to ASME BPE (DIN 11866 Range C): 2 1/2 " Connection DNE: Clamp Liner DIN 32676 for ASME pipes (DIN 11866 - C, OD-Tubing) Connection DNA: Clamp Liner DIN 32676 for ASME pipes (DIN 11866 - C, OD-Tubing) Position DNE/DNA: axial/tangential top, 12:00 o'clock with counter parts for suction and discharge port Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 µm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 µm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (product contacted part) Shroud: AISI 304 - 1.4301 Calotte holder: AISI 304 - 1.4301 Bearing bracket/Lantern: stainless steel - AISI 316 Motor: three-phase motor with PTC thermistor Size: 160M Vendor: our choice Performance: 11 Speed: 2900 rpm Voltage: 380/400/415 VD Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity

Marca / Fabricante Hilge
Número de pieza del fabricante HYGIA II K KYS 65/65/11/2
Descripción End suction stainless steel pump
KCCO Número de artículo 10108834
+49 (0)511 89 88 09 10
Consulta de piezas de recambio