Pieza de recambio DURIETTA 0 /1 KYY 32/25/0.75/2 Hilge

Información sobre la pieza de recambio DURIETTA 0 /1 KYY 32/25/0.75/2

as pre-delivery 97954888 Execution: Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Bloc version with stub shaft and motor Installation: on motor foot Painting colour: RAL 9005 Performance: Q = 4 m³/h, H = 12 m Fls Medium: unbekannt Viscosity: , Density: Temperature: , Concentration: Impeller(s): semi-open impeller 1087.5 Ø 108OB Shaft seal: single mechanical seal Silicon carbide / Silicon carbide / EPDM Elastomers: EPDM Connections: Diameter DNE 32 Diameter DNA 25 Connection DNE: DIN 11851 Threaded Male Connection DNA: DIN 11851 Threaded Male Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 µm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 µm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (product contacted part) Bearing bracket/Lantern: stainless steel - AISI 316 Motor: three-phase motor with PTC thermistor Size: 071Y Vendor: Kaiser Performance: 0.75 Speed: 3450 rpm Voltage: 460VY (± 5%) Frequency: 60 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 460 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Advice: During pump operation, it could be necessary to limit the pump flow to the nominal flow to prevent unfavorable pump operation (cavitation, overload of motor). Documents: Pump test report, Operating manual, Declaration of CE conformity