We supply the original spare part MAXA 65-160 CNY 80/65/7.5/2 from Hilge worldwide and look forward to your enquiry.
Cr-Ni-Mo steel Execution: Industrialstandard Wet end parts in Cr-Ni-Mo steel (AISI 300 series) Design: horizontal, single stage pump in long coupled version, with standard motor Installation: on mild steel baseplate Coupling: DKM Painting colour: RAL 9005 Performance: Q = 50 m³/h, H = 20 m Fls Medium: water Testing Bay Duty Point (Water 20°): Q = 50 m³/h H = 22 m Fls f = 50 Hz Impeller(s): closed impeller 6516 Ø 145 Shaft seal: single mechanical seal hard carbon / stainless steel / EPDM Elastomers: EPDM Connections: Diameter DNE 80 Diameter DNA 65 Connection DNE: Kremo-Flange EN1092-1/01 B1/PN16 (fixed) Connection DNA: Kremo-Flange EN1092-1/01 B1/PN16 (fixed) Position DNE/DNA: axial/radial top, 12:00 o'clock Materials: Casing/casing parts: AISI 300 series Impeller(s): AISI 316L - 1.4404 Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (product contacted part) Baseplate: mild steel - St 37 Bearing bracket/Lantern: cast iron - GG 20 Motor: three-phase motor with PTC thermistor Size: 132S Vendor: our choice Performance: 7.5 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B3 - on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity
|Brand / Manufacturer||Hilge|
|Article number||MAXA 65-160 CNY 80/65/7.5/2|
|Description||End suction stainless steel pump|
|KCCO Article number||10117214|