Spare part HYGIA II K KTY 65/65/18.5/2 Hilge

Information for spare part HYGIA II K KTY 65/65/18.5/2

Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Bloc version with stub shaft, motor with integrated frequency inverter Installation: on motor foot Painting colour: RAL 9005 Performance: Q = 22 m³/h, H = 70 m Fls bei 50 Hz Q = 22 m³/h, H = 90 m Fls bei 56 Hz Medium: Wasser, Cip Impeller(s): semi-open impeller 23018 Ø 230 Shaft seal: single mechanical seal with encapsulated spring hard carbon / Silicon carbide / EPDM - FDA, USP Class VI and 3A Sanitary conform Execution: duo-directional Elastomers: EPDM Connections: Diameter DNE 65 Diameter DNA 65 Connection DNE: DIN 11851 Threaded Male Connection DNA: DIN 11851 Threaded Male Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 µm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 µm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (not a product contacted part) Bearing bracket/Lantern: stainless steel - AISI 316 Motor: three-phase motor with PTC thermistor With integrated frequency inverter, Tronic execution / Equipment for FC: remote control completely wired and ready to use, containing ON/OFF-switch and potentiometer completely mounted Size: 160L Vendor: Grundfos Performance: 18.5 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity