Spare part HYGIA I K KYS 50/50/2.2/2 GEA HILGE

on request

We supply the original spare part HYGIA I K KYS 50/50/2.2/2 from GEA HILGE worldwide and look forward to your enquiry.

Free spare parts enquiry

  • Guaranteed response
  • free of charge & without obligation
  • Expert review

Information for spare part HYGIA I K KYS 50/50/2.2/2

Cr-Ni-Mo steel Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Bloc version with stub shaft, motor with stainless steel shroud Stainless steel shroud with GEA company logo Installation: on combi foot with machine pads Painting colour: RAL 9005 Performance: Q = 18 m³/h, H = 18 m Fls Medium: Alginate-Suspension, CIP Impeller(s): semi-open impeller 1604 Ø 150 Shaft seal: single mechanical seal Silicon carbide / Silicon carbide / EPDM Elastomers: EPDM Connections: Diameter DNE 50 Diameter DNA 50 Connection DNE: DIN 11851 Threaded Male Connection DNA: DIN 11851 Threaded Male Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 µm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 µm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 µm (product contacted part) Shroud: AISI 304 - 1.4301 Combi foot: AISI 304 - 1.4308 Bearing bracket/Lantern: stainless steel - AISI 316 Motor: three-phase motor with PTC thermistor Size: 090L Vendor: our choice Performance: 2.2 Speed: 2900 rpm Voltage: 230VD/400VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity

Brand / Manufacturer GEA HILGE
Article number HYGIA I K KYS 50/50/2.2/2
KCCO Article number 10086006
+49 (0)511 89 88 09 0
Spare parts enquiry