Spare part 5W4C6H-AAGLHP4D9999H9+CBECJAJB E+H /Endress+Hauser

Information for spare part 5W4C6H-AAGLHP4D9999H9+CBECJAJB

AA Approval: Non-hazardous area G Design: Fixed flange, long face-to-face length L Power Supply: 100-240VAC/24VAC/DC H Output; Input: 4-20mA HART, pulse/freq., switch output P Housing: Remote, alu, coated 4 Cable, Remote Version: 15,00 m coil + signal cable D Electrical Connection: Thread NPT1/2 9 Liner: 71304890 (H) Hard rubber liner covers the complete front side of flange (= flat face) acc. to E+H Flowtec no. 123025 (version 3) 999 Process Connection: 71393466 (A1K) Cl.150, A105, flange ASME B16.5, flat face; face-to-face length = 776mm acc. to E+H Flowtec no. 123025 H Electrodes: Alloy C22, bullet nose 9 Calibration Flow: 71279734 (E) 0.2%, 5-pt, traceable ISO/IEC 17025; points have to be defined between 0.2 and 10 m/s (for DN450 till DN600 between 0.2m/s and 1400l/s) and must be defined in volume flow. CB >Sensor Option: IP68, Type 6P, Fact-potted corrosion protection EN ISO 12944 C5-M/Im1 EC >>Application Package: ECC electrode cleaning JA >>Test, Certificate: Inspection certificate 3.1, EN10204 (material certificate meas. tube+flange) JB >>Test, Certificate: Pressure test, internal procedure, test report additional specification Format display 1 value, max. size Value 1 display Volume flow Value 2 display None Value 3 display None Value 4 display None Display damping 0,00000 s Totalizer 1 Unit m3 Operating mode totalizer Net flow total Failure mode Stop Totalizer 2 Unit m3 Operating mode totalizer Net flow total Failure mode Stop Totalizer 3 Unit m3 Operating mode totalizer Net flow total Failure mode Stop Curr. output 1 Volume flow Current span 4...20 mA NAMUR Value 0/4 mA 0,00000 m3/h Value 20 mA 2.500,00000 m3/h Failsafe mode current output Max. Damping output 1 1,00000 s Operating mode Pulse Assign pulse output Volume flow Pulse value (per pulse) 0,30000 m3 Pulse width 100,000 ms Failsafe mode pulse output No pulses