Pieza de recambio AMS Parox 2000 AMS

Información sobre la pieza de recambio AMS Parox 2000

19" rack mounting Application: N2-Inerting H2S concentration 0-10 Vol. % 02 < 1 Vol. % dry (dewpoint - 45°C) und cold sample gas (ambient temp. at gas inlet of the analyser). Gas analysis: Paramagnetic oxygen analyzer Thermostatically controlled at 55 ° C Measuring range 0-100 vol.% O2 Detection Limit: 0,01% Repeatability +/- 0,1% T90 <= 10 s at 90 l/h and gas change from Nitrogen to air Measured value output 0-20 / 4-20 mA adjustable RS 232 interface (USB or D-SUB9 interface) 2 alarm relays 1 fault contact switch 1 relay for pump control Pressure influence Zero: non influence Pressure influence Span: 1% air pressure Change cause 1% Change in reading without backpressure regulator (Option) or pressure compensation (Option) Operating conditions Internal flow controller, setpoint input: 10-90 l / h Operating gas pressure 0.01 - 1 bar Operating temp: +5 - +45°C 2 point calibration: fully automatic or manual Relative humidity: 0 - 75% General Operation menu driven in D / E / F Password protection of settings can be selected Power supply 100 - 240 VAC 50/60Hz Rack mounting enclosure 19 "3U IP 00 with dust filter for front panel mounting Dimension: WxHxD: 482x133x245 mm Gas inlet / outlet tube: 1/4 "compression fittings, stainless steel