SEIKA develops, manufactures and distributes sensors for measurement of phyiscal

quantities and electronic and mechanical accessories for sensors. Inclinometers for nearly all

existing tilt measurements and a series of robust accelerometers with integrated sensor

electronics are SEIKA's standard products. Next to these, SEIKA also manufactures a

number of customer specific sensors

Model 

Measuring range

Resolution

B1, B2, B3

±3g, ±10g, ±50g ( 1g = 9.81ms^-2 )

<0.001g, <0.005g, <0.01g 

BDK3

± 3 g 

< 10-3 g 

1...300 Hz

BDK10

± 10 g 

< 5*10-3 g 

1... 800 Hz

BDK100

± 100 g 

< 1*10-2 g 

1... 1.5 kHz

NB3

±10° (±20°) 

<0.001°

NA2-05, NA2-10

NA3-30

NA4-45, NA4-70

±5°, ±10°

±30°

±45°, ±70° 

<0.001Grad, <0.002Grad

<0.005Grad

<0.01Grad, <0.01Grad

N2, N3, N4

±10°, ±30°, ±70° 

<0.001°, <0.005°, <0.005° 

NG2, NG3, NG4

±10°, ±30°, ±80° 

<0.001°, <0.005°, <0.005° 

NG...I

Inclinometer type NG2, NG3, NG4 with integrated 4...20mA signal conditioner 

NG...U 

Inclinometer type NG2, NG3, NG4 with integrated 0...5V signal conditioner 

NG360 

Inclinometer with 360° measuring range and integrated microprocessor and RS485 interface 

Model 

Features

SB1I

Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 4...20mA output.

SB2I

Sensor box (98 x 64 x 56mm3) with two integrated SEIKA sensors of type B, BD, BDK, N or NB and two integrated signal conditioners with a 4...20mA output each. Both channels are electrically isolated from each other.

SB1U

Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 0...5V output.

SB1S

Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type, one integrated signal conditioner with 0...5V output and two open collector switch outputs that respond to traversing of adjustable thresholds.

SBS1U

Sensor box (98 x 64 x 56mm3) with one integrated SEIKA-Servo-Inclinometer for measuring small angles of up to 2 degrees with very high resolution and an integrated signal conditioner with 0...5V output.

SB360

Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of type NG360, internal microprocessor and RS485 interface.

SBG2U

Sensor box (124 x 80 x 58mm3) with two integrated SEIKA sensors of type NG and two 0...5V outputs.

SBG3I

Sensor box (124 x 80 x 58mm3) with three integrated SEIKA sensors and three integrated signal conditioners with 4...20mA output.

SBL1

Sensor box (180 x 180 x 100mm3 - large and robust) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 4...20mA output.

SBL1S

Sensor box (180 x 180 x 100mm3 - large and robust) with two integrated SEIKA sensors of any type, one integrated signal conditioner with 4...20mA output, one integrated signal conditioner with 0...5V output and two safety relays that respond to traversing of adjustable thresholds. The SBL1S has two redundant, electrically isolated measuring channels for safety related applications.

XB..

Extra robust, pressure-, saltwater- and corrosion-proof stainless steel sensor box (ø120 x 50) as an alternative to the SB.. housings (180 x 180 x 100mm3) for especially harsh operating conditions, aggressive fluids and saltwater.

SC485B

Box (63.5 x 58 x 35mm3) with RS485/RS232 converter for operation of inclinometers NG360, SB360, and XB360 from a RS232 port.

Model

Features

NV4a

Filtering signal conditioner for sensor signal matching with symmetrical +/- 4 V voltage output

NV6a

Filtering signal conditioner for sensor signal matching to a 4...20mA, 2-wire interface

NV8a

Filtering signal conditioner for sensor signal matching with an asymmetric 0...5V output voltage

SW3

Sensor cube for multiaxial arrangement of SEIKA accelerometers and/or SEIKA inclinometers

SBBS, SBBB, SBBW

Fixing plates from stainless steel for sensor boxes SB..